Specification :

Gigabit 1000M fiber media converter fibre to ethernet
Joe[at]veecom.com.cn

Description

Support 1000Base-T, 1000Base-LX&1000Base-SX, Multimode and single mode optional, double strand and single strand optional

Introduce

Overview

V-10/100/1000MB Series Media Converter is designed to meet the needs for massive fiber network deployment and able to extend a legacy copper based Ethernet network via fiber cable to a maximum distance up to 120Km. It is fully compliant with IEEE802.3z standards; built-in Switch ASIC has turned the device function more like a 2 ports switch than a traditional converter. User can get all switching benefits such like traffic segmentation, frames checking & error filtering.
The installation and operation procedures of the device are simple and straightforward. Operation status can be monitored through a set of Diagnostic LED located in the front panel.

Features

Support 1000Base-T, 1000Base-LX&1000Base-SX
Convert 1000bps Ethernet copper port to optical port
Fiber type: Multimode and single mode optional, double strand and single strand optional
Up to 80Km distance on single-mode fiber
Allow transmitting and receiving VLAN data packet
Two types optional: stand-alone unit and Modular Chassis
Internal power supply, including AC220V or DC-48V
Technical Specification

Ethernet Copper Port
Data rate: 10M, 100M, 1000Mbps
Auto-negotiate on Full/Half duplex topology
Connectors: RJ-45 Connector
Auto MDI/MDI-X
Optical Port
Support 1000Base-LX&1000Base-SX
Connectors: SC/ST/FC single mode or Multimode
Single Strand and Double Strand fiber port optional
Single-mode wavelength: 1310nm and 1550nm
Multimode wavelength: 850nm and 1310nm
Single-mode wavelength: 1310nm and 1550nm
Device Size
Standalone : 110mm*140mm*40mm
Chassis : 19inch*250mm*125mm
Power
Voltage: 100~240VAC or -48VDC
Power Consumption: