Welcome to
Auto Maintenance Co; Ltd

Free Member
Auto Maintenance Co; Ltd
Auto Maintenance Co; Ltd
China
  • Sell

    Lexia-3 Peugeot/Citroen

    Quantity Order:
    Peugeot + Citroen Scan
    This diagnostics software allows you to perform complete diagnostics of all from 1995 until present models. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

    Main Features:
    Unlike other universal car scanner tools which only read fault codes, this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexer, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

    The following diagnostic functions are supported:
    Read fault codes
    Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
    Program supports report printing or copy to clipboard.

    Clear fault codes
    This function clears all stored fault codes and other diagnostic information.

    Read identification
    Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

    Auto Diag Scan (complete car scan/test)
    Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

    Measured Values
    Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

    Actuator test
    Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

    Programming functions/Adaptation
    This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit.

    Hardware and software requirements
    Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
    If customer requires, we can prepare ready to work PC.

    Packaging List includes:
    Main unit
    OBD-2 cable
    USB cable
    Software CD


You have [3] new inquiries.
Go to Member Menu

Home - Trade List - Product List - Inquiry List - Cooperation List - Company List
Copyright © 2024 Indomonster.com. All Rights Reserved.