Specification :

1. Please insert the SIM card before installing, and make sure the SIM card has no password, otherwise the trackerwill not work normally.

2. Please make sure that all the cables of the tracker has been connected rightly, and then connect the tracker to host power. Must not install or take down the tracker when it is power on. If you found any troubles or omissions about the connections of cables, please cut off power first, otherwise you will easily damage the tracker.

3. The tracker works in wireless communications, so please cut off the host power before your vehicles entering fuel depot and dangerous material place.

4.The tracker’ s work voltage is 10V-36V. Please use the tracker in the scope of work voltage.

5. The host of GPS tracker is a low-power wireless transmitter and receiver. It receives and sends radio frequency signal when it is working.

6. To avoid electromagnetic interference or uncompatible configuration, please stop using your tracker in the