Specification :
NOCCHI SWIMMEY PUMP | SWIMMING POOL PUMP | PUMP NOCCHI | NOCCHI PUMP | PUMP NOCCHI SWIMMEY | SWIMMING POOL PUMP | PUMP NOCCHI | NOCCHI PUMP | PUMP NOCCHI SWIMMEY | SWIMMING POOL PUMP | PUMP NOCCHI | NOCCHI PUMP | PUMP NOCCHI SWIMMEY | PUMP SWIMMING POOL | PUMP NOCCHI | NOCCHI PUMP |
Nocchi Swimmey Pumps for Swimming Pools & Ponds
Swimmey Pumps by Pentair Water Pump Nocchi.
Swimming pool pumps, surface mounted, self-priming and are built using the latest technology to provide the best performance with the most economical use of energy. Pump Swimmey all complete with integral strainer basket to collect leaves and wildlife that may end up in the pool, anything collected in baskets visible through clear plastic lid. Motor is made to international standards of IP 55
Inlet and outlet connections 40mm and 50mm for easy installation.
Model:
1. SWIMMEY 15
Flow: 250 l / min
Head: 15 meters
Voltage: 230
Power: 0.75 HP / 0.50kw
Type: Continuous Running
2. SWIMMEY 19
Flow: 300 l / min
Head: 19 meters
Voltage: 230
Power: 1 HP / 0.75kw
Type: Continuous Running
3. SWIMMEY 24
Flow: 400 l / min
Head: 15 meters
Voltage: 230
Power: 1.3 HP / 1.0kw
Type: Continuous Running
4. SWIMMEY 28
Flow: 470 l / min
Head: 18 meters
Voltage: 230
Power: 1.5 HP / 1.13kw
Type: Continuous Running
5. SWIMMEY 33
Flow: 550 l / min
Head: 21 meters
Voltage: 230
Power: 2 HP / 1.5kw
Type: Continuous Running
The latest generation pool pump Swimmey by Nocchi has been designed to provide maximum reliability. As a result, hydraulic components are very efficient, quiet and resistant to wear caused by sand.
Motor, which is a totally enclosed Fan Cooled units, completely isolated from the hydraulic components and are built with protection IP X5. It is also suitable for continuous operation.
Swimmey pumps have the following characteristics:
• self-priming speed
• Reinforced polymer chassis engineered pumps and filters
Impeller • Glass-reinforced Lexan and diffuser with good resistance to abrasion by sand
• Motor is suitable for use in hot, humid conditions
• Built-in overload cut ( single-phase version)
• Over-sized bearing with lifetime lubrication
• Stainless steel motor shaft
• Screw-on filter cover with a seal ring ' o' Teflon-coated
• a stable plastic base to dampen vibration.
