hebei anping oy electrical mesh welded equipment co., ltd, founded in 1986 is located in hebei anping county wire mesh industry zone , and covers and area of 150000 square meters . our main products are automatic building steel wire mesh welding machine , automatic fence mesh welding machine controlled by computer , stainless steel electrical welding mesh machine , 3D wire mesh block panel machine , straightening and cutting wire machine , digital control flame and plasma cutting machine , reinforcing construction spot welding machine , long-arm pneumatic spot welding machine
|
Seller:
- auto building steel wire mesh welding machine
The machine adopts electrical synchronous control technique both welding time and cent-control welding is composed of digital and integrated electric circuit .this operation is accurate , it has stable function , firm welded point and without welded tracks .Not only welding speed is fast but also it is easy to learn and operate .The machine is equipped with precise equipment for cutting weft and fixing place .so the length of wefts is identical and re3gualar , it is unnecessary to slice the side .Drawing mesh adopts the equipment with elastic tension link and fixing mesh it is easy to regulate mesh hole and mesh size is rather accurate .welding aperture could adjust randomly with in range .
Wire diameter 1.4-2.5mm Rated voltage 380v
Welding aperture 50*50-200*200mm Rated electrical power 75kva
Width of mesh 1200mm Overall dimension 2.5*2.5*1.5m
Number of warp 25 Machine weight 2.8t
Welding speed 45times/ min
- auto building steel wire mesh welding machine II
This machine adopts electrical synchronous control technique , both welding time and cent-control welding is composed of digital and integrated electric circuit .This operation is accurate , it has stable function , firm welded point and without welded tracks Not only welding speed is fast but also it is easy to learn and operate .Step motor controls fallen wefts structure and drawing materials are automatic , so it is even and accurate the edge of mesh is regular , it is unnecessary to slice the side .Drawing mesh adopts the equipment with elastic tension link and fixing mesh , it is easy to regulate mesh hole and mesh size is rather accurate , welding aperture could also adjust randomly within range
THE MAIN PARAMETER
Wire diameter 1.8-3.5mm Rated voltage 380v
Welding aperture 50*50-200*200mm Rated electrical power 220kva
Width of mesh 1200mm Overall dimension 2.5*2.5*1.8m
Number of warp 25 Machine weight 3.2t
Welding speed 45times/ min
- fence mesh welding machine
This machine adopts synchronous control technique both welding time and cent-control welding is composed of PLC program system with pressing firmly once only and weldig repeatedly .The input front-panel has two forms .touch screen and keyboard , it makes this machine more intelligent and reasonable .The weft supplies are automatic .The greatest advantage is that you can adjust the distance of wefts at random on one piece of mesh sheet .This machine is equipped with new and efficient trans formet whose gear shift has 8-class so it enlarges welding range , It is easy to learn and operate and welding output is several times and than manual work.
Wire diameter 3-5mmmm Rated voltage 380v
Welding aperture 50*50-300*300mm Rated electrical power 400kva
Width of mesh 2000mm Overall dimension 6*3.2*1.8m
Number of warp 41 Machine weight 3.2t
Welding speed 30times/ min Number of warp 41
- stainless steel electrical welding mesh machine
The shelf is made of thick steel board and this kind of machine adopts closed straightened wire , upright gearbox and electromagnetism steple3ss adjustable speed , integrated clutch sends the weft so the hole of mesh is very even and firm , welding is controlled by three-phase power electronics .This machine will stop working by digital control when the length is enough welding power is high and the structure is compact , adjustable control is also very meticulous
THE MAIN PARAMETER
model Width(mm) Aperture(inch) Diameter(mm) Speed(mesh/ min) Length(m) Weight size
DNW-4 609.5(2’)-1219.2(4’) 1/ 2-1 0.65-2.0 e50 120-400 2.75T
1.5*2.3*1.6(M)
1/ 3 0.65-1.2
3/ 8-3/ 4 0.65-1.5
DNW-5 609.6(2’)-1524(5’) 1/ 2-1 0.65-2.0 e50 120-350 2.95T
1.6*2.5*1.6(M)
1/ 3 0.65-1.2
3/ 8-3/ 4 0.65-1.5
DNW-6 1219.2(4’)-1828.8(6’) 1/ 2-1 0.65-2.0 e45 120-300 4.6T
1.7*3.0*1.8(M)
1/ 3 0.65-1.2
3/ 8-3/ 4 0.65-1.5
DNW-7 1219.2(4’)-2133.6(7’) 1/ 2-1 0.65-2.0 e40 120-300 5.2T
1.8*3.5*1.9(M)
1/ 3 0.65-1.2
3/ 8-3/ 4 0.65-1.5
- straightening and cutting wire machine
Straightening and cutting wire machine
It is easy to operate this kind of machine , without noise and this machine is suitable to be used in straightening steel wire the diameter is from 1.6 mm to 5mm and the length is from 30mm to 6000mm.
- 3D panel machine
3D wire mesh block panel machine
This kind of machine adopts PLC touching screen control system .The power of pneumatic and step motor , It could insert and cut wire , flat mesh and foam board automatically and the finished product is a steel polystyrene splint .The production line has high automation and production efficient , low welding rate , high intensity and even welding point the mesh sheet is also flat .
- digital control flame and plasma cutting machine
This kind of machine has two kinds of cutting ways , digital control flame and plasma , otherwise the material that is to be cut could order automatically ,
Plasma cutting , thickness 1-60mm
Flame cutting , thickness 3-200
Area 2m *2.4m
- reinforcing construction spot welding machine
IMport controllable silicon controls this kind of machine , the power of welding pincers could adjust at random , and the touch point of welding pincers is made of good chromium copper, welding diameter is from 1.4mm to 3.0mm
- fence post
The wall thickness of post is 1.0mm, the plank is molded through cold bending and rolling. The post with simple structure, the section of regular shape of semi-ellipse, can be installeed conveniently. The pot hook on the post is devided into several by the opening and lengthways evently at certain distributer along the post body, and spaced evently. The pot hook board is bent inside along the camber line, and matchen with the straightedge of the ellipsoldal post body, whice effectively prevents prizing of the tools and ensures the safety of the fence.
The treatments of the post fall into two kinds: Galvanized and PVC-sprinkled, whice can prolong the lift-span of the post in the open air
The mesh suitable:
Mesh opening:100*100mm
100*200mm
Wire diameter:under 8mm
The surface treatments of the mesh panel can be divided into PVC-sprinkling and PVC-dippe-d.Also can accept customers requirements
|
|
www.weldingmachine.cn
Go to Member Menu