Specification

RHEOMETER RC 1 PORTABLE AND MORE

The Rheometer RC 1 is a rotational viscosimeter ( Searle principle) for mobile use and laboratory operation. The highly dynamic measuring drive system enables rotational tests where the shear rate and the shear stress are pre-set ( CSR and CSS) , and creep tests.
The electronic unit, the keyboard, the measuring drive system and the measuring bob coupling are integrated in a portable housing.

SPECIAL FEATURES ;
-build-in rechargeable battery and mains power.
-parallel display of 4 optional parameters of viscosity, temperature, torque, shear rate, shear stress, rev ( on a 4 line alphanumeric display) .
-dust proof keyboard.
-torque overload protection.
-storage of the measuring conditions pre-set when Rheometer is switched off.
-data buffering in the RAM for mains and battery operation.
-serial interface for printer and personal computer.
-user-friendly software RHEO for using the Rheometer and for evaluating and displaying the data measured.

OPTIONAL TEST MODE
-CSR - rotational test with shear rate pre-set ( manually and via personal computer) Shear rate levels pre-set according to ISO 3219 defined speed and shear rates
-CSS - rotational test with shear stress pre-set ( in connection with a computer system)
-Creep test ( in connection with a computer system)

ATTACHMENTS
-Thermostat for cylinder measuring systems
-Resistance thermometer Pt 100
-Standard cylinder and double-gap measuring systems ( DIN) , also as one-way measuring systems
-Optional measuring device for cone/ plate and plate/ plate measuring systems
-Peltier-thermostatic device for cone/ plate and plate/ plate measuring systems-
- vertically adjustable stand
-battery charger and case
-rechargeable battery for mobile use.

ADDITIONAL EQUIPMENT:
Personal Computer/ Printer Liquid thermostat Normal and Calibrating liquid.