CAPILLARY VISCOMETER ( KV100 ) IN-LINE/ ON-LINE PROCESS CONTROL
Specification
CAPILLARY VISCOMETER ( KV100 ) IN-LINE/ ON-LINE PROCESS CONTROL
PROCESS VISCOMETERS KV100
Process viscometers KV100 are especially suited for continuous measurement, sensitive control, and regulation of medium-viscosity and low-viscosity media. The devices work on the principle of a capillary viscometer with continual volume flow and measurement of pressure decrease over the measuring capillary.
STRUCTURE AND FUNCTION
The pressure decrease between the two ends of the measuring capillary, which is proportional to viscosity, is determined by two pressure sensors, or it is directly measured by differential pressure transducer. Pressure difference is transformed into an electric standard signal, which can be used for display and as a control signal. The inlet of the aspiration tube is located in a continuous-flow chamber through which the medium can flow in a main or partial
stream ( bypass) from low up to medium process pressures. Process viscometer can be completed with an electronic indicator for more functions of instrument control, signal processing, as well as temperature adjustment of viscosity.
APPLICATIONS ( EXAMPLES) SPECIAL ACCESSORIES
-paints, lacquers i continuous-flow chamber ( stainless steel or synthetic materials)
-glues, adhesives i temperature sensor Pt100 ( optionally with transducer)
-silicone fluids i display device for measuring data
-oils, resins i software with temperature correction of viscosity
-lubricants
-diary products
-detergents
-polymer solutions
-melted fatty matters
-emulsions
Distributor, agent, penjualan, service, perbaikan upgrade system. alat uji, alat laboratorium, alat maintenance, alat inspeksi lapangan, alat quality inspection, alat quality control, alat riset, alat monitoring system, alat preventive maintenance. Jakarta - Indonesia.
www.alatuji.com
contact: 08156141954 - 0811893101