Feature:
- 16-point digital measurement
- Automatic zero point adjustment and automatic correction,
- Acquire PC data by using the 16 bit PCMCIA card or A/ D card
- It is small and light that it is easy to use as the portable use
- Large LCD monitor that can display 8 point simultaneously
- High speed measurement : DC - 25kHz
Specifications:
1 For strain gauge, sensor for strain gauge ( load cell, manometer, stroke ..detector, etc.) and voltage output sensor meter
2 Measurement point : 16Points
3 Available gauge resistance : 60 - 1000©
4 Scope of input power : 0.100 - 10, 000mV/ V, 0.001 mV/ step
5 Bridge power : ± 1V
6 Plane adjustment method
..-Electronic automation
..-Adjustment time: Approximately 1 second to 6 seconds
7 Plane adjustment accuracy : ± 2 X 10 Strain
8 Scope of measurement
..- Amplifier : ± 5, 000, ± 10, 000, ± 25, 000, .± 50, 000 X 10 Strain
9 Output : ± 10V
10 Number of responsive measurement : DC-25kHz
11 Low-pass filter : 10, 50, 500, 5, 000Hz pass
12 Stability
..- Zero point : ± 1 X 10 strain
..- Temperature : ± 0.05% / ' C
13 Indication
..- Bar Graphic LCD : Bargraphic LCD
- Monitor : 132.0 X 39.0mm
..- Resolution: 8 points are displayed in digital simultaneously
14 Loaded with 120 ohm switch box for strain gauge ( Separate switch box is unnecessary)
15 Input terminal: Select from prototype of 7pin Tajimi Jack or D-Sub 9Pin
16 16bit N.I PCMCIA Card
..- Analog input: 16 input, resolution: 16bit, response speed: 200ks/ S Adjust each channel independently
..- Digital I/ O: 8TTL
..- Counter/ timer: 2up/ down, resolution: 24bit, maximum frequency: 24MHz
..- Trigger: Digital, 10 PFI line
17 Scope of temperature to use : 0 - 50
18 Power : 220V, 60Hz
19 Dimension and weight : 434( D) X 250( D) X 185( H) mm, 6.0kg
20 Accessory
..-Standard accessory parts
....1 for each of manual( main body) , SAS program manual, AC power cable
..-Selected accessory parts
....Sensor input cable ( 10m) |
Indomonster Priority 17th Year
