Horizontal tensile tester (desktop type)
This tester holds both sides of the test specimen and pulls it at a constant speed, to determine the maximum load up to failure and the elongation at failure, and the work required for failure. When a
specimen is inserted into this constant-rate-elongation machine, it is secured by two pneumatic clamps, then the test starts automati-
cally. The load cell connected to the fixed side clamp detects load, to calculate, display and outputs on the printer the tensile strength, elongation, breaking length, tensile energy and tensile stiffness.
Tensile loading capacity : 500 N (50 kgf)
(optional: 100 N, 1000 N)
Span : 80 to 200 mm, regulating increment of 1 mm, standard: 180 mm
Tension stroke : 70 (span 200 mm) to 190 mm (span 80 mm) Tension speed : 2 to 100 mm/min /P Specimen width : 15 mm (optional: 25, 50 mm) Specimen clamp : pneumatic type; The inserted specimen is clamped automatically.
Special clamp for wet paper (optional)
Recorder (optional) : can be connected
Measurement items :
1. Setting items: test name, specimen No., machine No., basis weight, specimen orientation, specimen width, span, tensioning speed
2. Measuring items: tensile strength (kNm), elongation rate (%), (optional elongation (mm))
3. Calculation items: average, maximum, minimum, standard deviation, breaking length, elongation rate, tensile energy absorption and tensile energy absorption index, tensile stiffness
4. Measurement of tensile elongation (optional) After the measurement result is outputted, the elongation is calculated by inputting the load. Referential standards : JIS P-8113-98, T-494om-01, ISO 1924/2
Power source : 100/110 VAC 50/60 Hz 2A Air source : 0.5 MPa
Outer dimensions : 800 x 450 x 300 mm Instrument weight : 48 kg |
Indomonster Priority 17th Year
