Specification

ULTRASONIC FLAW DETECTOR TUD310 :
# Two measuring unit: mm/ inch;
# Four Rectify Ways: positive half-wave.negative half-wave. full wave and radio frequency.
# Two scanning mode: A and B;
# Gate alarming function.
# 32 detecting channels are available with a separate detecting parameter
and DAC curve in every channel.
# Automatic generation of DAC curve. and 30 points can be recorded at most.adjustable offset curves and gain correction functions are available.
# Three detecting modes: single-probe . dual-probe and transmission;
# Equipped with high-speed USB port and flash memory device can be used directly on the instrument
# Data and documents are managed under FAT file system. making the management of inspection data more convenient. faster and more reliant
# Super large memory up to 32M. 1000 echo data can be stored in 32 detecting channels.
# Brand new digital signal circuit is designed for TUD310. Digital signal processor ( DSP) is used for signals analyzing. making circuit noise reduced properly and waveform more stable.
# EPSON ink-jet printers can be connected with TUD310 by USB cable
# Real-time waveform display and review

Technical specifications
Items Description
Scanning Range 2.5 mm ~ 9999 mm
Scanning Resolution 0.1mm ( 2.5mm ~ 100mm) 1mm ( 100 mm ~ 5000mm)
Gain Range 0dB ~ 110 dB
D-Delay -20s~ + 3400s
P-Delay 0s~ 99.99s.resolution 0.01s
Sound speed 1000 m/ s~ 9999m/ s
Bandwidth 0.2MHz~ 15MHz( Low0.2~ 1, Mid.0.5~ 4, High 3~ 15)
Vertical linearity error 3%
Horizontal linearity error 0.2%
Dynamic range 32dB
Rectification Positive half wave, negative wave, full wave, and RF
Sensitivity leavings 60dB
Test mode Pulse-echo, dual and through transmission
Pulser Spike excitation pulser
Damping 50ohms, 150ohms and 400ohms
Reject Linear, 0-80% of full screen, variable in steps of 1%
Unit Metric/ inch
Interface RS232/ USB
Printer EPSON inl-jet printer
AC requirements 85-264V AC/ 1.0A, 47-63Hz
Temperature -10~ 40
Humidity 20% ~ 90% RH
Power supply Li battery 4x3.6V 4000mAh
Charging time 4~ 5hours
Weight 1.47kg
Overall dimension 243mmx173 mmx70 mm
Standard delivery
# Main unit
1
# Power adaptor
1
# Neck strap
1
# Cable for probe
2
# Carrying case
1
# Instruction manual
1
# Straight probe
1
# Angle probe
1
# Couplant
1
# Flash disk
1
Optional accessories
# Connecting Cable
# Dataview for communication with PC
# Various probes

Alatuji.
Kontak Person: Fikri ( 0815 614 1954, 0811 893 101) .
Address: Jl. Pahlawan Revolusi No. 22B.
Telp. + 62-21-8611 131, 8611 259.
Fax : + 62-21-8611 207.
EMAIL : sales@ alatuji.com
Website : www.alatuji.com