PT. ASABA

http://indomonster.com/alatsurveysokkia

PT . ASABA JAKARTA

SOKKIA is the only company survey equipment maker in the world special just to make the survey tool only. The company was first established in Japan around 1920 under the name Sokkisha , whose meaning in Japanese language is a survey tool factory . The company name was later used as well as the brand of the various survey equipment they make. Around 1992 the brand name was changed to SOKKIA , and used until now . As a company that only manufactures survey instruments only, SOKKIA highly depended on the superiority of products and marketing chain . Including there is accuracy , reliability in the field, working system simplicity , completeness tools ( hardware , software internal ) , the marketing team and sales that include calibration and repair of equipment .

PT Asaba is the sole agent authorized SOKKIA throughout Indonesia since 1970. About a PT Asaba with headquarters in Jakarta and branches ( Medan, Bandung, Semarang, Yogyakarta, Surabaya, Balikpapan, Makassar, Pekanbaru) provide services entirely in the form of a solution for users of equipment survey to various problems in the field. SOKKIA through PT Asaba provide broad coverage of products, both digital optical and electronic manual, either hardware or software. Apart from the superior products SOKKIA, PT Asaba supported by experts in the field surveys ( geodesy, mining, civil) and specialists in the field of calibration and repair of equipment.

The main workshop PT Asaba to SOKKIA be in Jakarta headquarters, equipped with three ( 3) sets of collimator ( see picture) . Two sets each of which consists of empatbuah collimator. Namely two collimator opposite direction to the regular calibration ( front) and extraordinary ( rear) , the other two in the ordinary way by a certain angle toward the top and bottom for the calibration of vertical angles and axes ( vertical, horizontal) instrument. Angle measuring equipment ( theodolite, total station) calibrated here, also water pass ( either automatic or manual) . A set of other collimator consists of only two collimator in the direction of ordinary and extraordinary, and is used for calibrating water pass only. In the picture, set collimator consists daridua collimator left, middle and right consists of four collimator. Calibration in the optical collimator fully manual, and supported again with special equipment for disc reading angle adjustment on theodolit

For digital electronic equipment ( digital theodolite, Total Station) must pass the test again connected directly to the electronically with special software, and supported other special equipment for tuning

For the purposes of distance measurement ( EDM, Total Station) , workshop PT Asaba has a base-line distance that has been used ( and tested in the field) since before 1990. In the image below we can see that the tripod planted ( concreted) directly to the floor of the building for eliminating the tripod position shift factor between one measurement to another. The distance measured is near, intermediate and far. Every tool of any brand needs to be calibrated in the three distance ranges such as the nature of the use of light ( infrared, laser) for distance measurement. In this case happens to the tool ( generating, transmitting and receiving light) , as well as conditions outside the tool ( propagation, light reflection) . Semestinyalah each workshop unggulmemiliki base-line distance tested for a third of the distance range.

Until now the workshop of PT Asaba is the most complete equipment and expert personnel in Indonesia. His ability is to repair the equipment, especially the electronic digital equipment, by detecting and repairing damage to the electronic board is not just detect the damage and replace the expensive electronic modules.

Each survey SOKKIA equipment owners can request a detailed report from the appliance in terms of distance measurements, as shown below. The report of the workshop is always out along with a certificate of calibration and archived in an orderly manner for many years, but was not given to customers unless requested. This is because based on experience proved to be much more customer only requires a calibration certificate only.

SOKKIA also periodically re-examine the completeness, capability and reliability workshop PT Asaba to issue certificates as below.

Support post-sale complete and reliable urgently needed by users peralatansurvey in the field. For optimal results, the equipment must always be within the tolerances of accuracy to factory defaults. Equipment decreased accuracy or damages need to be addressed / corrected and immediately returned to the field for the smooth working in the field. The workshop, which is not able to accurately and quickly resolve various problems of equipment would greatly disrupt the smooth work.

For survey and mapping application requirements are common for PT Asaba provide consultancy solutions on various problems in the field using survey equipment or software. Many years of experience with a variety of different industries ( construction, mining, infrastructure, etc.) makes the PT Asaba can provide the best service for owners of equipment SOKKIA.

You may click the "Company Info" and "Contact Us" to browse and see other informations of PT. ASABA's website.