Specification :

ALARATE ( ALATHER) BN Series Ink
`
Description
ALARATE ( ALATHER) BN series inks, which prepared with the excellent hydrophobic resin, high quality pigments and fillers, and so on, are of excellent adhesion and good covering powder. The film is of excellent flexibility and is anti-tensile, washable, foldable, etc.
a
Recommended Application
Æ Recommended substrate: PA Polyamide Fiber , PU, PET, PVC, Touch Rubber, etc.
Æ Recommended for: Leather, waterproof nylon, canvas, Oxford cloth, ribbon, mark, stickers, cards, Plastic articles with touch rubber coating, etc.
b
Proposed Operation
Prepare: To clean the surface with ALATIVE SC7 treater and make sure non-dust, non-impurity. To dilute the ink with 3-20% ALATIVE SR6 thinner and then is ready In order to regulate the drying rate of ink , please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant . In order to improve the adhesion and hardness of the film effectively, please add 10-15% ( to total) ALATIVE SA5 activator.
Mesh count: 70T to 180T
Drying: Air dry in 15 to 30 minutes , or forced dry at 60 OC in about 10 minutes ( without activator) .
Air dry in 12-15 hours, or forced dry at 80 OC in about 30 minutes ( activator added) .
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
c
Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 1kg/ can, 5kg/ barrel, 20kg/ barrel