Specification :

According to the kind and quality of raw materials and the feature of main equipment, the automatic flip aerated concrete production equipment can take different methods to produce. In General, first, milling the fly-ash or sand into pulp together with water, then pouring lime, cement, water and foamer to mix and send them into the mould, then Cutting into various specifications block or the plank after resting, foaming and curing. after that sending them into the autoclave by steaming larry. finally, forming porous-light concrete products through high temperature and high pressure steam maintenance.

Raw materials of aerated concrete
Fly ash/ sand , lime, parget , cement, water and powered aluminum

the automatic flip aerated concrete production corollary equipment
1, Raw material pretreatment equipment
Crusher-Fly ash aerated concrete block materials such as lime, gypsum etc, must be broken it can go into the next working procedure
ball mill-lime and gypsum used in fly ash aerated concrete , must be mulled. They can be better chemical reaction.
2, Raw materials measurement equipment-In generally, raw materials measurement adopt the automatic measurement system which controlled by computer.
3, Material mixing pouring machines- Material mixing and pouring equipment is mainly mixing casting machine. It is not only the mixing equipment, but also the pulp pouring machines.
4, cutting machine-after pulping and airing, fly ash aerated concrete become green bricks. Due to the large volume of greeen bricks, there must be cutting processing to reach the required product size.
5, autoclave-autoclave is the equipment in which the Portland products go in hydration reaction and Fly ash aerated concrete body can get physical and mechanical performance
6, boiler-the boiler mainly provide the heat energy for the autoclave and the Raise the kiln
7, auxiliary equipment
( 1) Elevater-it is the key to the pretreatment for raw material
( 2) mold frame, mould, baseplate
They are mainly molding equipment of fly ash aerated concrete
( 3) steaming larry, ferry push car, sling
They are necessary equipment for autoclaved maintenance system
Zhengzhou Deyi Heavy Machine Manufacturing Company specially produce automatic flip aerated concrete production equipment. Our technology is advanced, the products are sold to both at home and abroad.

product features
( 1) Progressive self-innovation on introduction Germany technology
( 2) Adopting the popular air-invert cutting technology
( 3) Full set of equipment owns high automatic level
( 4) Automatic monitoring full cutting process
( 5) Service life long
Aerated bricks’ features
( 1) With light
( 2) Keeping warm
( 3) Fire protection
( 4) Sound insulation
( 5) Less errors
( 6) Strength high
( 7) Green initiative
( 8) Low cost
Zhengzhou Deyi Heavy Machine Manufacturing Company specially produce automatic flip aerated concrete production equipment and automatic hydraulic brick machine . Our technology is advanced. the product quality is excellent and After-sales service is thorough, so the products are sold to both at home and abroad.
Welcome for the new and old customers come to consult, we are at your service