Multi-function Solar Charger

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Quantity:

10000

Pack. & Delivery:

Color Box

Features
1.1 The Solar Charger uses either sunlight or the supplied AC adapter to recharges its internal re-chargeable
batteries. It provides three different voltage outputs( 3.6V
4.2V and 5.3V) for charging electrical devices.
` 3.6V DC output to charge radio or for lighting.
a 4.2V DC output to charge most cellular phones.
b 5.3V DC output to charge USB or other digital electrical products. (PDA, digital camera……)
1.2 The solar charger regulates the voltage and current to prevent over-charging of the internal batteries with
sunlight or with the attached adapter.The solar charger regulates the voltage and current to prevent
over-charging of accessories. (cellular mobile, PDA, digital camera……)
1.3 The unit is water resistant.
Å’
Specifications
2.1 The Solar Charger
` Outer dimention: 65*135*39mm
a Weight: 180g
b Maximum power consumption: 6W
2.2 Working parameter
`.The charging time
A. 5-7 hours is required to charge fully the internal batteries with the attached adapter.
B. 10-12 hours is required to charge fully the internal batteries with the sunlight.
C. 3-5 hours is required to charge fully the mobile with the attached adapter or sunlight.
a.
A. The attached adapter: AC IN (AC100~240V 50~60Hz)
DC Out (5.3V 500mA)
B. The solar cells: DC6V (No load) 180mA (No load)
C. Working voltage: 3.6V, 4.2V, 5.3V
Working Current: 200mA

Instruction manual
3.1 Please fully charge the unit via sunlight or adapter before first use.
To check the charge level, press the checking button, A red indication indicates less than 75% charge and
a green indication indicates greater than 75% charge. Please see Illustration(1).
3.2 To charge the solar charger with the attached adapter: Plug the adapter into the AC socket and plug other
end into the “IN� port of the Solar Charger. See Illustration (2) and (3). Switch the charging unit to the
“1� position, the charging light indicates red while charging and the charging light indicates green when
fully charged.
.3.3 Muti-funtion charging cable, Please see (11).
3.4 To charge the solar charger with sunlight: Switch the unit to the position “`�. Please see Illustration (5).
Position the solar cells in the direction of the sun . The charging light indicates red while charging and
the charging light indicates green when fully charged:
3.5 Direct charging via the adapter or sunlight: Switch the charging unit to the “a� position, Please see
Illustration (6) and (7).
3.7 To use the sucker hook, Please see the Illustration (8) and (9).
3.8 To replace the internal rechargeable battery, Please the Illustration(10).
3.9 The unit will reset after dead through charging by adapter or sunlight because of short circuit.
Û
Notes
4.1Please fully charge the unit via the internal batteries with the sunlight or adapter prior to first use.
4.2Don’t clean the Solar Charger with solvents, use mild soap and water to clean.
4.3Handle with care.
4.4Please confirm the device voltage and the Solar Charger setting prior to attaching device to be charged.
4.5Do not submerge the solar charger in the water..
4.6When charging device(cellular phone,PDA,etc) please switch of the device to the position “OFF�.
4.7When charging the Nokia mobile please using the attached Nokia adapter through the PDA outlet.

Recommend to your friends