Seller:
- Ceramic Bearings
Ceramic bearings provide by SunYoung Industry have the advantages of abrasion-resistance, high intensity, heat-resistance, insulation, low weight, magnetism-resistance, and corrosion-resistance, which the metal materials don't own.
1) Specifications: ball bearings
2) Bearing rings: zirconia or silicon nitride
3) Balls: silicon nitride, zirconia, or alumina
4) Cage: PTFE, PA, PEEK or stainless steel, etc.
- Plastic Bearings
Plastic bearings provided by SunYoung Industry include anti-corrosion bearings (made of PVDF or PTFE), precise bearings (made of POM or PA), anti-acid and anti-alkali bearings (made of HDPE or PP or UPE), high temperature bearings (made of PEEK or PI), etc. Which have the performance of corrosion and wear resistance, reduce vibration and anti-bump, are free from the maintenance and so forth.
- Hybrid Bearings (Ceramic Ball Bearings)
Hybrid bearings provided by SunYoung Industry have following features:
1) Bearing rings: stainless steel or bearing steel, etc.
2) Balls: silicon nitride, zirconia or alumina, etc.
3) Cage: PTFE, PA, PEEK or stainless steel, etc.
4) Higher speed and acceleration, higher accuracy, high temperature usage, reduced lubrication requirements, low thermal expansion, extended operating life, etc.
- Timing (Synchronous) Belts
The timing belts of SunYoung Industry are made from CR, HNBR or PU, etc., which provide a synchronous transmission by utilizing the engagement between belt tooth and pulley, offer the following advantages: high transmission power, high efficiency, a wide range of speed ratios, low transmission noise. The belts are widely used across all sectors of industry, for example: automotive industry, textile industry, chemical industry, light industry, metallurgical industry, machine tool and instrument manufacturing industries, etc.
Products are sorted as: Industrial timing belts, Automotive timing belts, Double sided timing belts, and PU timing belts.
1. Industrial timing belts
a) HTD series: 2M, 3M, 5M, 8M, 14M
b) STPD/ STS series: S2M, S3M, S4.5M, S5M, S8M, S14M
c) T series: MXL, XXL, XL, L, H, XXH, T2.5, T5, T10, AT5, AT10, AT20
d) RPP/ HPPD series: 2M, 3M, 5M, 8M, 14M
2. Automotive timing belts
ZA, ZB, ZD, ZBS, MY. RU, S8M, STS
3. Double sided timing belts: which teeth feature is just as same as single sided timing belts, but its double sides both have teeth. Enable belt can drive both sides of pulleys.
a) DA - symmetrical teeth on both sides
b) DB - interlaced teeth on both sides
4. PU timing belts: include PU timing endless timing belts and open end timing belts, are widely used in light industry, household machines, automatic doors and some other equipment, which have the characteristics of low noisy, long lifetimes, running smoothly, high oil and ozone resistance, etc..
- V Belts
The SunYoung Industry's range of v belts includes common v belts, narrow v belts, viable speed v belts, wide angle v belts, banded v belts, and automotive v belts. The belts are used for vehicles, in the food industry, for bowling facilities etc. Additionally, our belts are applied for power transmission devices on various types of advanced equipment.
1. Common v belts: Y, Z, A, B, C, D, E
2. Narrow v belts: SPZ/ XPZ, SPA/ XPA, SPB/ XPB, SPC/ XPC, 3V/ 5N, 5V/ 15N, 8V/ 25N
3. Viable speed v belts: W16, W20, W25, W31.5, W40, W50, W63, W80, W100
4. Wide angle v belts: 3M, 5M, 7M, 11M
5. Banded v belts: 9J, 15J, 20J, 25J, AJ, BJ, CJ, DJ
6. Automotive v belts: AV10, AV13, AV15, AV17, AV22
- Poly V Belts (Ribbed Belts)
Poly v belts provided by SunYoung Industry are made from CR, EPDM, PU, etc. and have the following features:
1) Double functions of both flat belt and v belt and high transmission efficiency.
2) Excellent flexibility, consequently suitable for high speed and big speed ratio transmission with linear velocity up to 40 m/ s.
3) Compact driving system.
4) Less vibration, less heat-generation and lower noise.
5) Good resistance to heat, oil and abrasion and long service life.
- Conveyor Belts
Conveyor belts provided by SunYoung Industry are made from NBR, PVC, PU, PE, SI, CC, NN, etc. with several patterns for customers to choose. Which have the character of high elastic, high wear resistance, high friction, low elongation, smooth, oil resistance, adherence resistance, etc. and have been using in tobacco, electronic, food, timber, automotive part, glass, light industry, etc.
Products:
1. Nylon core flat transmission belts
2. Fabric conveyor belts: CC, NN, EP
3. Solid woven conveyor belts: PVC, PVG
4. Light conveyor belts: DC (PVC), DX (NBR/ PVC), DPU (TPU), etc.
5. Special purpose conveyor belts
a) Acid & alkali resistant conveyor belts
b) Oil resistant conveyor belts
c) Cold resistant conveyor belts
d) Heat resistant conveyor belts
e) High temperature resistant conveyor belts
f) Patterned conveyor belts
g) Endless conveyor belts
h) Raised edge conveyor belts
i) Foodstuff conveyor belts
j) others
- Ceramic Balls
Ceramic balls provided by SunYoung Industry have the following features:
1) Materials: silicon nitride (Si3N4), Zirconia (ZrO2), Alumina (Al2O3)
2) Application: for bearings, inspection, pumps, and other rolling conditions
3) Capacity: 3, 000, 000pcs/ month for 5/ 32" silicon nitride balls
4) Diameter: 1/ 64" ~ 2"
5) Precision: G3 ~ G20
Specifications (compare to steel):
(1) Lighter than steel;
(2) Lower friction coefficient, rolls more freely;
(3) Larger elastic modulus;
(4) Lower coefficient of thermal expansion;
(5) Superior surface finish;
(6) Higher high-temperature hardness;
(7) Never rust, and can roll without oil or grease;
(8) Better corrosion resistant than steel.
- Ceramic Rings (For Pad-printer)
Ceramic rings are mainly used in homochrome or polychrome pad-printer that adopts ink-cup system. Because of the outstanding features that advanced ceramics owns, the sealing performance and vibratility of ceramic rings are much better than that of alloying rings.
Ceramic rings provided by SunYoung Industry have the following features:
1) Material: zirconia (ZrO2)
2) Have fine crystalline and density higher than 6.05g/ cm3
3) Have superior wear resistance performance, which lengthens the life of the ceramic ring and avoids leakage
4) Edge breadth can be less than 0.1 mm; single or double edge with different specifications; thickness can be less than 3 mm
5) Have the advantages of abrasion-resistance, corrosion-resistance, high intensity, heat-resistance, etc. and greatly increase the service life of the edge of ink-cup
- Advanced Ceramic Products
Advanced ceramics provides the perfect solution and a cost-effective, high performance alternative to traditional materials such as metals, plastics and glass. In general terms, advanced ceramics exhibits exceptional properties that make them highly resistant to melting, bending, stretching, corrosion or wear. Their hardness, physical stability, extreme heat resistance, chemical inertness, biocompatibility, superior electrical properties and, not least, their suitability for use in mass produced products make them one of the most versatile groups of materials in the world.
SunYoung Industry can also supply with ceramic products, which are made of alumina, zirconia, silicon nitride, carborundum, etc., to customers operating in the petrolic, chemical, mechanical, automotive, textile, military, medical, aerospace, semiconductor, telecommunications, thermal management, domestic product and processing equipment industries.
1) Alumina (Al2O3) is the most widely used advanced ceramic material. It offers very good performance in terms of wear resistance, corrosion resistance and strength at a reasonable price. Its high dielectric properties are beneficial in electronic products.
2) Zirconia (ZrO2) has the highest strength and toughness at room temperature of all the advanced ceramic materials. The fine grain size allows for extremely smooth surfaces and sharp edges.
3) Silicon nitride (Si3N4) exceeds other ceramic materials in thermal shock resistance. It also offers an excellent combination of low density, high strength, low thermal expansion and good corrosion resistance and fracture toughness.
4) Carborundum (SiC) has the highest corrosion resistance of all the advanced ceramic materials. It also retains its strength at temperatures as high as 1400°C and offers excellent wear resistance and thermal shock resistance.
- Seals & Gaskets
Seals & gaskets provided by SunYoung Industry are applied in different industries, such as electron, electric, automotive industry, mechanical industry, chemical industry, apparatus, pipe, toy, sports parts, and commodity, etc..
We can develop the new products according to the requirement of customer. The products family of our seals & gaskets involve NBR, FPM, EPM, Si, CR, UR, SBR, IIR, NR, AR, PTFE, PA, etc..
The products with special formula has the high property of acid and alkali resistance, chemical solvent resistance, high temperature resistance, cold resistance, aging resistance and wear resistance.
- Hoses & Pipes
1. High pressure hoses
a) Wire braided hoses
b) Wire spiraled hoses
2. SAE & DIN hydraulic hoses
a) SAE 100 R1 AT / DIN EN 853 1SN & SAE 100 R1 A / DIN EN 853 1ST
b) SAE 100 R2 AT / DIN EN 853 2SN & SAE 100 R2 A / DIN EN 853 2ST
c) SAE J517 100 R3
d) SAE J517 100 R5
e) SAE J517 100 R6
f) SAE 100 R7 / EN 855 R7 & SAE 100 R8 / EN 855 R8
g) SAE 100 R9
h) SAE J517 100 R12
i) SAE J517 100 R13
j) SAE J517 100 R16
k) DIN EN 857 1SC
l) DIN EN 857 2SC
m) DIN EN 856 4SP
n) DIN EN 856 4SH
3. Rubber hoses
a) Steam hoses
b) LPG hoses
c) Fireproof hoses
d) Fabric interlining hoses
4. PVC hoses & pipes
a) Air hoses
b) Flat discharge hoses
c) Fibre reinforced hoses
d) Garden hoses
e) Gasoline hoses
f) High pressure spray hoses
g) Shower hoses
h) Single transparent hoses
i) Spiraled wire reinforced hoses
j) Suction pipes
5. Other hoses
a) Teflon (PTFE) hoses
b) Nylon (PA) hoses
c) Polyurethane (PU) hoses
d) Hoses & pipes made of silicon rubber / silica gel / ABS / PP / PE / VEA, etc.
- Rubber Products
Rubber products provided by SunYoung Industry have various materials and hardness for all kinds of applications, such as NR, SBR, CM, EPDM, NBR and so on, depending on your requirements.
- Plastic Products
SunYoung Industry can provide all kinds of plastic products made from PVC, PE, PP, PB, ABS, PS, PMMA, etc. by machining, blowing molding, extruding, injection molding, compression molding.
|
|
alexshen9.en.ec21.com
Go to Member Menu