Specifications
General
Frequency range

Tx 144– 148 MHz

Rx 136– 174 MHz*
* Guaranteed range 144– 148 MHz
Type of emissions F2D/ F3E
No. of memory channels 207 ( incl. 6 scan edges and 1 call)
Frequency stability ± 2.5ppm ( -20° C to + 60° C) at 25° C
Operating temperature range – 20° C to + 60° C; – 4° F to + 140° F
Power supply 7.2 V DC

Current drain ( at 7.2V DC)

Tx 5.5W 1.4A
Rx Max. audio 310mA, Internal; 180mA, external
Standby 65mA
Power saved 20mA
Antenna impedance BNC ( 50© )

Dimensions

( proj. not incl.)

58( W) × 112( H) × 30( D) mm

29/ 32( W) × 4313/ 32( H) × 13/ 16( D) in
Weight ( approx.) 360 g; 12.7 oz ( with BP-264 and Ant.)
Transmitter
Output power ( at 7.2 V DC) 5.5 W ( High)
2.5 W ( Mid)
0.5 W ( Low)
Spurious emissions Less than – 60 dB
Max. frequency deviation ± 5.0 kHz/ ± 2.5 kHz ( wide/ narrow)
External mic. connector 3-conductor 2.5 ( d) mm ( 1/ 103) / 2.2 k©
Receiver
Sensitivity 0.14 µ V ( typ.; at 12dB SINAD)
Squelch sensitivity 0.1 µ V ( typ.; at threshold)
Selectivity 70dB/ 50dB typical ( wide/ narrow)
Intermodulation 70dB/ 65dB typical ( wide/ narrow)
Spurious and image rejection 75dB ( typical)

Audio output power

( at 10% distortion)
450mW with an 8© load
External speaker connector 3-conductor 3.5 ( d) mm ( 1/ 83) / 8©
Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Standard MIL 810 F
Method Proc.
Low Pressure 500.4 I, II
High Temp. 501.4 I, II
Low Temp. 502.4-3 I, II
Temp. Shock 503.4 I
Solar Radiation 505.4 I
Rain 506.4 I, III
Humidity 507.4 –
Salt Fog 509.4 –
Dust 510.4 I
Vibration 514.5 I
Shock 516.5 I, IV

Also meets equivalent MIL-STD-810-C, -D and -E
Ingress Protection Standard: Dust and water – IP54 ( dust-protection and water resistant)

All stated specifications are subject to change without notice or obligation.
Supplied accessories

* Battery case or battery pack*
* Desktop charger*
* Antenna
* Belt clip