Specification :

BASIC SPECIFICATIONS

TYPE : TY – 55
MATERIAL : PP
CAPACITY : 30 – 40 KG/ HR
MACHINE SIZE : 13 X 1, 8 X 3, 5 ( LXWXH / M)

B. SECTIONAL DETAILED SPECIFICATIONS :

1. EXTRUDER

GEAR BOX : OIL VABRICATION TYPE, GEAR MATERIAL SCM-21,
S 45 C WITH NITRIDING & GRINDER PROCESSING
THRUST BEARING : 29418
MAIN MOTOR : 25 HP MOTOR WITH INVERTER CONTROLLER
HOPPER : 500 X 500 MADE BY SUS 304
HOPPER : WATER COOLING TYPE
SCREW : MADE BY SACM 1, Ø 55 MM , L/ D = 30: 1
SCREEN CHANGER : HYDRAULIC TYPE, SINGLE HOLE
DIE HEAD Ø 100 MM : 2 SETS
AIR RING Ø 150 MM : 2 SETS
BLOWER FOR AIRRING : ¾ WITH AIR TANK : 1 SET
ELECTRIC PANEL : 8 ZONES CONTROLLER

2. TAKE UP UNIT = 2 SETS

A. FIRST STEP ROLL : CHAIN SPROCKET TYPE
- STEEL ROLL : WIDTH = 300 M/ M
- RUBBER ROLL : WIDTH = 300 M/ M
B. WATER COOLING TANK : MADE BY STAINLESS STEEL SUS 304 = 1 SET ( 2PCS)
C. PRESS PLAT : SUS 304 = 1 SET ( 2PCS)
D. DRIVE MOTOR : 1HP MOTOR WITH INVERTER CONTROLLER
E. SECOND STEP ROLL
- STEEL ROLL
- RUBBER ROLL
:
:
WIDTH = 300 M/ M
WIDTH = 300 M/ M

3. STRETCHING PLATE = 2 SETS

MATERIAL
WIDTH :
: MADE BY SUS 304
200 W X 1200 L
HEATING CONTROLLER : 2 ZONES

4. STRETCHING ROLL= 2 SETS

A. DRIVE MOTOR : 3 HP MOTOR WITH INVERTER CONTROLLER
B. RUBBER ROLL : 200 W X 3 PCS
C. STEEL PRESS ROLL : SS 41 CLOREN PLATING : 1 PC
D. PRESS ROLL TYPE : BY PNEUMATIC CYLINDER

5. WINDING UNIT = 2 SETS

A. DRIVE MOTOR : 0, 2 KG/ CM² TORQUE MOTOR X 2 PCS
B. WINDING SIZE : Ø 300 M/ M X 250 M/ M