Products Catalog

Specification

for permanent and indelible marking, dating or
labelling of multiple documents or labels in one
single operation or for numbering sets of forms,
receipt blocks, passports etc.
The machines from this series are highly recommended,
if you want the perforation to consist of a frequently
changing combination of numbers and/ or
letters or if there is a need for markings of variable
length or design. They are individually manufactured
according to your request.
At a character height of 7 or 8.5 mm, up to 16
characters in line can be adjusted quickly and comfortably
via the wheels' unit.. At a character height
of 5.5 or 6.5 mm even up to 20 characters, whereas
at 10 mm height still 14 characters are possible.
The wheels can include numbers, letters, or symbols,
and in most cases also an additional blank space
which excludes unused digits from perforation,
inserting a space instead.
You can perforate up to 3 lines in a column in one
single operation: A fixed text can be installed above
or below, as well as in front of or behind the wheels.
Additionally, a date or a changeable text can be fixed
above as well as below the wheels' unit. Both lines
can be altered quickly via easily exchangeable slides.
In their standard configuration, these machines are
manufactured with up to 6 number wheels and a
character height of 5.5, 6.5, 7, 8.5 or 10 mm.
By standard, they are delivered with one each
adjustable side and rear gauge.
The desired imprint can be placed up to 105 mm
from the upper or lower edge of the sheet –
measured from the edge of the form to the center
of the perforation.

Drive Electric Electric
Motor AC 230 V AC 230 V
special voltages or three-phas
possible current 230/ 400 V
special voltages
possible
Standard version: 6 wheels with
Maximum capacity: 25 -30 sheets 70 g paper
Weight net / gross: 32 kg / 34 kg Packaging: carton wooden case
Packaging dimensions: 59 x 39 x 27 cm