Specification :

Fusion Splicer Pt-650
Features
• Equel to Fujikura FSM-50s, Sumitomo Type-37 etc
• Core to core alignment by PAS technology
( PAS: Profile Alignment System)
• Digital fusion splicer with automatic focus function
• Fiber core can be display clearly
• Single X or Y view and X & Y view simultaneously
• Auto detect cleaved endface fault
• Display fiber cleaved and offset angle
• Display core and clad offset
• 5.6 inch TFT color LCD monitor with clear digital image display
• USB & VGA interface
• Software upgrade via USB interfac

Specefication
Model Pt-650
Applicable fibers SM ( ITU-T G.652) , MM ( ITU-T G.651) , DS ( ITU-T G.653) , NZDS ( ITU-T G.655)
Fiber cleaved length 12~ 16mm Coating diameter 250¼ m
16mm Coating diameter: 250 ~ 1000¼ m
Fiber diameter Cladding diameter 80 ~ 150¼ m
Coating diameter 100~ 1000¼ m
Fiber Count Single
Fiber aligning method Core or clad aligning
Image processing method Digital
Actual average splice loss 0.02dB  SM , 0.01dB ( MM) ,
0.04dB ( DS) , 0.04dB( NZDS)
Splicing time Typical 9 sec with standard SM fiber
Splicing mode 53( templet) , 40( user)
Splice loss estimate More accurate
Return loss  60dB
Storage of splice result 4000 results 20 parameter per result
Fiber display and magnification 300X X or Y view , 150X X and Y view
Tube heating time Typical 30 sec
Tube heating mode 9( templet) , 24( user)
Tube heating temperature Can be adjusted
Applicable Protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2N
Electrode life 2500
No.of splice/ heating with battery Typical 150 cycles ( splice/ tube heat) with inner Li-battery
Display screen 5.6 TFT inch color LCD monitor
Image change over The fiber image is turned upside down
Terminals USB 1.1 and VGA
Operating condition 0 ~ 5000m above sea level, 0 ~ 95% RH and -10^ 50 , respectively, Max. wind velocity of 15m/ s
Power supply AC 100-240V with AC adapter; inner Li-battery( 6600mAH)
Dimensions 150mm( L) x150mm ( W) x150mm ( H)
Weight 2.7 Kg excluding battery, 3.2 Kg including battery