Specification :
Products: titanium bar/ rod
Feature: small density, high strength, good mechanical performance, anticorrosion, heat and cold resistant, non-poisonous, non-magnetic
Origin: Baoji, China
Shape: Round or square or hexagonal
Ceitification: ISO 9001-2008
Standard: ASTM B348 ASTM F136 ASTM F67 AMS 4928
Specification: diameter5-300mm
Material: Gr1 Gr2 Gr3 Gr4 Gr5 Gr6 Gr7 Gr9 Gr11 Gr12
Titanium bar
Product Size( mm) Grade Specification
Titanium
Bars
¦ 5mm~ 300mm
Lengthd360 0mm
Gr1 Gr2 Gr3 Gr4 ASTM B338, F67
Gr7 Gr11 Gr12 ASTM B348, F136 , ASME SB348
Gr5 ASTM B348, F136
ASME SB348, AMS 4928
Physical properties
Diameter Diameter allowable deviation Round, not more than
6.35~ 7.94 ± 0.12 0.20
> 7.94~ 11.11 ± 0.15 0.23
> 11.11~ 15.88 ± 0.17 0.25
> 15 .88~ 22.23 ± 0.20 0.30
> 22.23~ 25.40 ± 0.22 0.33
> 25.40~ 28.58 ± 0.25 0.38
> 28.58~ 31.75 ± 0.27 0.40
> 31.75~ 34.93 ± 0.30 0.45
> 34.93~ 38.10 ± 0.35 0.53
> 38.10~ 50.8 0 ± 0.39 0.58
> 50.80~ 63.50 + 0.79, 0 0.58
> 63.50~ 88.90 + 1.19, 0 0.88
> 88.90~ 114. 30 + 1.58, 0 1.16
The chemical composition of the bar:
Grade Impurities , not more than, %
Ti
( The lowest content) Fe C N H O Residual elements
single total
Gr1 99.1 0.20 0.08 0.03 0.010 0.18 0.10 0.40
Gr2 98.93 0.30 0.08 0.03 0.010 0.25 0.10 0.40
Gr3 98.81 0.30 0.08 0.05 0.010 0.35 0.1 0 0.40
Gr4 98.56 0.50 0.08 0.05 0.010 0.40 0.10 0.40
Residual elements should be include Al, V, Sn, Mo, Zr, Ni, Cu, Si, etc.
Use field: Mechanical equipment, plating equipment , precision parts, oil industry, power industry, seawater desalination industry, salt and alkali manufacturing industry, coking line industry, hydrometallurgy industry, pharmaceutical industry.