Specification :

Fission Engine Enhancer, is a fuel economizer and pollution reduction device which utilizes a electro-field hydrodynamic technology to improve the combustion of hydrocarbon fuels, Mostly, engine combustion is incomplete due to the molecular clusters of hydrocarbon fuel. In normal cases, only about 70% of the total burnt fuel provides the real power, with 30% of the fuel wasted and carbonized.
Fission, is the solution to this problem. When the fuel passed through the field, the hydrocarbons are ionized and create positively aligned molecules. The ionized hydrocarbon fuel results in a complete combustion when in contact with the negative oxygen.

According to the research, only 80-95% of the petrol is burn, others fuel is wasted due to the poor combustion. Apply the electro-magnetic field will make the oil molecule to be decomposed, electron magnetic field resonance will break the oil molecules and mineral materials. To rely on the electro magnetic field resonance, the oil molecule will be broken, and the impurities in the fuel will be fully isolated. In the meantime, the resonance will also produce anion and oxygen, so the fuel can reach up to 100% complete combustion without any amassed carbide in the engine by the easy combination of the air and oil molecule. That' s how the engine performance can be improved.
• Mileage increase rate from 2% - 40% subject to the car conditions
• Increase the engine performance
• Extend engine life.
• Improve the fuel combustion up to 100
• Reduce the amassed carbide of an engine and the emission of exhaust and smoke.
• Reduce engine vibration and keep the engine at the best conditions.
• Rapid investment return
Reduce Maintenance
Decrease Vibration
Get extra mileage
Reduce Pollution
DIY Installation
Increase Torque
Unleaded Petrol
Reduce Carbon
Increase Power
No alternation
Leaded Petrol
Saves Fuel

Q. How long it takes for Fission Engine Enhancer to become effective?
A. Fission Engine Enhancer effective right away. However, in some other cases the OBD ( on-board diagnosis) computer may require time for " adaptive learning" before it can " appreciate" or " realize" the fuel-saving effect brought by Engine Enhancer. In these cases, the benefits will be optimized only after about 2000 - 2500 km of " break-in" driving. For old cars, better than 100, 000 km accumulated ( for example) , it depends on the time it takes Fission to clean carbon deposits on the engine parts and may be optimized after 2000 km of driving ( or a couple of full tank refills) .

Disclaimer : All test data are based on petrol ( not diesel) car. Engine Enhancer should tight ( coil) on petrol supply line toward the engine ( petrol supply line tube must be made of plastic material, not metal) . For non EFI ( electronic Fuel Injection) engine after installed the RPM may increase due to the improvement, in such case user can tune down the RPM to the original position.

The fuel line supply tube must be rubber. Engine Enhancer cannot work on metal material.