Electric Control Valve Actuator (ICL-6062)

Quantity Order:

Origin:

China

Pack. & Delivery:

Carton

Two models:
-ICL6062-05A, accepting 0~10VDC/0~5VDC/5~10VDC input signal and providing proportional control
-ICL 6062-05D, providing incremental control, assembled with reversing motor.
Specification
Action ICL 6062-05A: Forward or backward (through jumper to select)
ICL 6062-05D: Reversible
Control ICL6062-05A: Proportional
ICL6062-05D: Incremental
Input signal ICL6062-05A: 0~10VDC/0~5VDC/5~10VDC
Motor Synchronic and reversible
Rating 24VAC 50/60Hz 2.4W
Force 500N
Max stroke 20mm
Material Gear: Nylon
Cradle: Galvanized steel plate
Stand: Die cast aluminum
Cover: ABS engineering plastics
Protection IP40
Full stroke time 10mm stroke is 100s when frequency is 50Hz.
10mm stroke is 85s when frequency is 60Hz.
Ambient temperature Operation: -15 ~ 55 degree
Storage: -20~65degree
Relative humidity S6062-05A: 90% non condensing
S6062-05D: Non condensing
Net weight 0.64kg
Matching nominal diameters of valves with actuator
Control valve DN15 DN20 DN25 DN32 DN40
Mounting instruction
-Mounting position is upright to horizontal. It is recommended that the valves be mounted in the upright position in accessible location.
-Sufficient clearance must be allowed for actuator maintenance or detaching.
-The actuators should be protected from the dipping water that could enter the housing and damage the mechanism or motor.
-The actuator must not be covered with insulating material.

Recommend to your friends