E-light Beauty Machine

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Product kind: E-light Beauty Machine
Product Model: EGL-A
Technology parameter
output power: 1000W
Power frequency: 50HZ— 60HZ
Voltage: 100V— 240V
Operation panel: Digital press key
Size of Machine: 46x48x109 ( cm)
Size of outpacking: 63x56× 121( cm)
Packing material: Aluminium alloy case
Weight: 60kg

The use principle of E-light beauty Machine:
During the course of common light energy repair( laser/ strong light) , based on the principle of light selectivity absorb, thE-light energy can be absorbed a great Model by skin pigment when the E-light energy penertrate epidermis.The high energy or the dark skin is with large hazard when it is repaired.Another, most part of light energy is reflected and refracted, so the energy which reach and absorbed by target tissue is only 30^ 40% , so in order to repair, the energy need to be improved. However, a large number of skin pigment absorbing light energy limit the energy in the repair option should not be too large, thus affecting the effect single repaired.

Due to EGL-A E-light beauty Machine in the repair process, thE-light energy is mainly used to adjust the impedance value of the target tissue and guide the RF ( radio frequency) energy focused act on the target tissue. Light is not used as a major restoration of energy, thus avoiding the main issue of energy reflection and refraction. Based on RF ( radio frequency) characteristics, RF ( radio frequency) thermal effects in the skin tissue depend on current density, current density distribution depends on the impedance distribution of skin tissue, the higher the tissue temperature, the lower the resistance, the larger current density, the higher the thermal effect; On the contrary, the lower the tissue temperature, the higher the resistance temperature, the smaller the current density, the lower the thermal effects. So, the absorption of target tissue to RF ( radio frequency) energy which play a major role of repair is not affected by the epidermal pigment barrier, RF ( radio frequency) energy can fully act on the target tissue, get good repairing effect.

The repair scope of EGL-A E-light beauty Machine:
1, wrinkle removal/ face lifting : the use of IPL and RF combined technology ( E-light) , providing ideal temperature rising distribution of deep dermis layer , for the entire dermis layer and connective tissue, playing a role in stimulating the restoration of collagen hyperplasia with different depth to achieve repair effect.
2, remove the deep spot / remove dermis patches / White Rejuvenation / Removing red blood streak: intense pulsed light and radiofrequency release energy at the same time, the use of the skin selective absorption of light energy to effect impedance difference of target tissue and normal skin , that the large role of E energy can function in the various lesions of epidermis and dermis layer.The solar energy is far lower than traditional IPL devices, so under the premise of no damage to the epidermis, make a variety of pigmented and vascular lesions for the dermal layer of the epidermis to absorb more more energy, get rid of these diseased tissue better, while stimulating regeneration of collagen tissue, restoring skin elasticity, so that can get overall improvement in the skin.
3, acne repair: the past IPL equipment have little effect on acne repair . The skin beauty and wrinkles removal based on E-light can be accurately applied to the target tissue such as sebaceous glands and acne, using short-wave to kill acnes propionibacterium, the use of the combined effects of infrared light and radio frequency to reduce sebaceous gland activity, received exciting results.

light fine hairs / thick black hairs removal: the past IPL equipment off thick black hair, the effect is still good, but when off light fine hairs, the problem is relatively large, such as lip hair, this is because the previous IPL equipment can only output strong light, effect on the hair, absorb light energy by hair, and can conduct the heat energy transfered to the hair follicles to destroy hair, but when the hair is too thin or the color was so shallow that the energy of absorption and coduction have no enough destruction of hair follicles; While the skin beauty wrinkle system based on E-light output strong light, it is also relying on RF energy which have the role of the depth of subcutaneous 5 - 15mm to have direct effect on the hair follicles, rather than rely solely on the hair shaft conduction, so has a very good effect on small and light, Even gold, the white hair.

EGL-A E-light Beauty Machine Repair Process:
1, before repair
1. Skin Category: E-light for the white, brown or yellow skin is safe. Remember that before restoration, pay attention to prevent sunning and To avoid the sun.
2. To exclude contraindications:
Light allergy or drug-induced light sensitive, or during the short-term of being takE-light sensitive drugs
presently ( 6 months) using Isotretinoin
Restoration Area is with atypical moles or malignant lesions
With pacemaker or a set-in defibrillator
Active herpes or skin has broken
With keloid disease
Severe diabetes, hypertension, epilepsy, pregnant women
3. signed an agreement
4. clean the skin, eliminate the remnant perfumes, cosmetics and so on.
5. Digital camera to archive: Every time in the same background, the samE-light shooting, front, left, right, side, each one photo.
6. To E-light hair removal, hair be trimmed to 1mm.

Å’
EGL-A E-light beauty Machine operation:
1. Customer to wear special protective goggles, operator wear specific protective eye, masks and surgical gloves.
2. Preauricular or mandibular angle and other more hidden parts, smearing a layer of thickness about 1mm cold gel. In accordance with the starting energy set the parameters, carry out spot tests, testing spot 2-3, wait 3-5 minutes to observe the skin reaction to determine the parameters. For the brown or black skin, have to wait for a longer time to observe the reaction.
3. When repair more prominent parts of bone tissue( such as the forehead, temporal, and zygomatic) , according to patient' s tolerance extent, necessary to reduce the energy of RF.
4. When use it, two electrodes are placed on the skin with a certain degree of pressure, carefully observe whether the two electrodes contact with the skin intactly or not. Spot must have a certain degree of overlap between each other in order to ensure the rehabilitation areas have been covered.
5.If the facial keep red and swollen , causalgia and other skin reactions continuously after rehabilitation, should immediately be cold.

. EGL-A E-light Beauty Machine Note:
1. Restoration before and after, protect from light and sun.
2. Restoration before and after within 1 week , avoid a variety of chemical or mechanical stimulation.
3. Restoration before and after within two weeks, do not use filler or other injections.
4. Restoration before and after within three days, avoid direct or indirect thermal stimulation, particularly forthose patients suffering the high degree of pigmentation tendency.
5. If restoration before to require laser resurfacing, at least need to wait for 3 months.

Recommend to your friends