Welcome to
SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD

Free Member
SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD
SHENZHEN HONG YE JIE TECHONOLOGY CO; LTD
China
  • Products Catalog

    9055 Electronic Potting Compound silicone

    Price:
    6.9-12.85
    Quantity Order:
    Origin:
    China
    Payment Method:
    Telegraphic Transfer (T/T), L/C
    Quantity:
    8000
    Pack. & Delivery:
    20Kg/pail as a set (Part A 10Kg + Part B 10Kg)

    Specification :

    9055 Electronic Potting Compound silicone
    Product Feature
    HY 9055 is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC( Poly-carbonate PP ABS PVC, etc. and metal materials.

    Typical Application
    HY 9055 could be applied to
    - high powered electronics,
    - DC/ DC module and circuit board which requires heat dissipation and high temperature resistance.
    -It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

    TECHNICAL GUIDELINES
    1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
    2, Mixing Ratio: part A: part B = 1: 1
    3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
    4, Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick, then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80^ 100 , the silicone will cure in 15 minutes; while in 25 room temperature, the silicone will cure around 8 hours.

    SHELF LIFE AND TRANSPORTATION
    1. Twelve( 12) months when stored at 24C in tightly closed original packages.
    2. This kind of product is non-dangerous product, which could be transported as general chemicals.
    3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
    Any questions of silicone rubber for mold making, please feel free to contact Sara :
    TEL: 086-755-85224692
    FAX: 086-755-89948030
    MOBILE: 086-13823674309
    Website: www( dot) szrl( dot) net
    E-MAIL: sarahu6688( at) yahoo( dot) cn
    MSN: sara_hu6688( at) hotmail dot com
    SKYPE: sara_hu1



You have [3] new inquiries.
Go to Member Menu

Home - Trade List - Product List - Inquiry List - Cooperation List - Company List
Copyright © 2024 Indomonster.com. All Rights Reserved.