Specification :

Detail:

FG-1310-1200

1.25Gbps GBIC Optical Transceiver, 20km Reach

Features
# Dual data-rate of 1.25Gbps/ 1.0625Gbps operation
# 1310nm FP laser and PIN photodetector for 20km transmission
# Duplex SC optical interface
# Standard serial ID information compatible with SFF-8053
# + 3.3V/ 5Vsingle power supply
# RoHS Compliant
# Operating case temperature: 0 to + 70

Applications
# Switch to Switch interface
# Switched backplane applications
# Router/ Server interface
# Other optical transmission systems

Description

The GBIC transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/ 1.0625Gbps and from 20km transmission distance with SMF.

The transceiver consists of two sections: The transmitter section incorporates a FP laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier ( TIA) . All modules satisfy class I laser safety requirements.

The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate degradation of the laser. Loss of signal ( LOS) output is provided to indicate the loss of an input optical signal of receiver.

The standard serial ID information Compatible with GBIC MSA describes the transceivers capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the two-wire serial CMOS EEPROM protocol. For further information, please refer to SFF-8053

Absolute Maximum Ratings

Stress in excess of the maximum absolute ratings can causepermanent damage to the module.

Table1- Absolute Maximum Ratings

- - - -
Parameter | Symbol | Min | Typical | Max | Unit |
Maximum Supply Voltage | Vcc | 0.5 | - | 4.5 | V |
Storage Temperature | TS | -40 | - | 100 | |
Relative Humidity | RH | 0 | - | + 85 | % |
- - - -

Recommended Operating Conditions

Table2- Recommended Operating Conditions

- - - -
Parameter | Symbol | Min | Typical | Max | Unit |
Operating Case Temperature | Standard | TC | 0 | - | + 70 | |
Power Supply Voltage | VCC | 3.1 | | 5.5 | V |
Power Supply Current | Icc | | | 300 | mA |
Data Rate | Gigabit Ethernet | | | 1.25 | | Gbps |
Fibre Channel | | | 1.0625 | |
- - - -

Mechanical Dimensions

Ordering information

- - - -
Part number | Product Description |
FG-1310-1200 | 1310nm, 1.25Gbps, 20km, 0C~ + 70C |
- - - -
Model Number:
Brand Name:
Payment Terms:
Minimum:
Certification:
Delivery Time:
Supply Ablity: