E3 T3 DS3 Optical Electrical Converter: SDH-E3

Quantity Order:

www.fastfom.com
sales@ fastfom.com

E3 T3 DS3 Optical Electrical Converter: SDH-E3
cenny.xu[ at] hotmail.com

Description

E3/ T3 Optical/ Electrical Converter

Introduce

Description

SDH-E3 is an interface converter for E3 electrical and optical interface conversion. It is designed for the PDH equipment coaxial interface and optical interface interconnect.

Complete loop - back facility is supported for system diagnostic and commissioning. Compact casing and simple operation achieve the cost saving and investment protected.

Features

High reliability, comply to ITU-T G.703
Single Fiber Bi-Directional is selectable
State-of-the-art design, ensure normal working under different environment.
Supports local and remote loop - back on electrical or optical interface for system diagnostic.
Suitable for PDH E3 interface interconnection.
Simple operation and maintenance
Compact design and low power consumption.

Technical Specification

Items
Description

Electrical Interface
Standard: ITU-T G.703 Compliant
Data Rate: 34.368 Mbps
Line Code: HDB3
Physical Connector: BNC Coaxial

Optical Interface
Bit rate: 34.368 Mbps
Coding: NRZ
Connector: SC
Light source: Laser Diode
Wave length: 1310 nm ( Typical) , or 1550 nm ( Optional) or Single Fiber Bi-Directional ( Optional)
Transmit power: -12 dBm ( 1310 nm ) / -5 dBm ( 1550 nm )
Receive sensitive: -36 dBm ( 1310 nm ) / -38 dBm ( 1550 nm )
Power supply: AC 220V, Range 165 V to 265 V; DC -48V, Range -36V to -72V
Power Consumption: 3 W

Environment
Working Temperature: 0 ~ 50 degrees.
Relative Humidity: 9 0 % ( Non condensing )

Dimension
W* H* D( mm) : 205 * 13 5 * 4 6

Recommend to your friends