UNITUBE LINE

Quantity Order:

Payment Method:

Telegraphic Transfer (T/T)

1. Application of the line
1.1 The line is used to extrude unitube for fiber ribbon 2-12ribbon which contains 12 fibers. cailei

2. Line main technical specifications
2.1 12ribbon fiber pay-off cage
Reel size §¶410¡�§¶50.8¡�391mm
Cage speed max 0-100rpm
Driven pay-off speed (structure speed) 70m/min
Ribbon fiber stranding pitch 500mm-3000mm
Ribbon fiber pay-off tension 2N-10N¡À0.5N
No. Of reel (max) 12
2.2 Gel filling device
Filling value max 120L/h
2.3 Take-up reel
Reel diameter PN1000-PN1250mm
2.4 Production line speed §¶7mm-§¶12m
Max70m/min
2.5 Over length control
Range of over length control¡¡¡¡¡¡¡¡ 05%-0.2%(§¶7mm-§¶10.4mm)
¡À0.2%(measure length 5m) ¡À0.2¡ë(measure length 5m)
2.6 Attenuation (surrounding temperature range 20-25¡æ)

3.Technical requirements
3.1 Line operation direction determined by user
3.2 Line colour determined by user
3.3 Overall dimension length¡¡60m
3.4 Line centre height 1000mm
3.5 Factory conditions for consumer
3.5.1 Cooling water should not contain float body, mineral substance, metal impurity and corrosion substance.
Pressure ¡�0.3Mpa
Hardness ¡Ü5¡ãdh
PH value 7-8
3.5.2 Compressed air should rustproof, waterproof and grease-dirt
pressure ¡�0.5MPa¡À.0.2MPa
Dew point -25¡æ
3.5.3 Power supply
Three phrases five wires 3¡�380V¡À10%, 50HZ¡À2%
3.5.4 Surrounding
Temperature of air-conditioned room 20¡æ-25¡æ

Recommend to your friends