Specification :

Characteristics:
Cotton( CC) conveyor belt is woven by cotton fibers bond in warp and in weft. Its elongation is relatively low. It is good in mechanical fastening and adhesion width rubber.
Cotton conveyor belt has relatively little deformation under high temperature condition.
the cotton conveyor belt is suitable for carrying light materials in short distance, applying in different industry such as metallurgy, building site, power industry, dock, mineral industry.
Polyester cotton conveyor belt is the upgraded product of cotton conveyor belt, and its tension resistant body is woven by polyester cotton fibers in warp and cotton fibers in weft.
Its comprehensive physical and mechanical characteristics are obviously better than those of cotton conveyor belt, especially the belt body is thinner and thus the belt lighter, the belt can reduce energy and material consumption for users.
Cotton conveyor belt is the ideal selection for medium, short distance and medium-load transportation of materials.

Specification Availability:  
Carcass Fabric structure Type No. of plies Cover thickness
( mm) Belt width
( mm)
Warp Weft Top Bottom
CC Cotton Cotton CC-56 2-6 3.0-18.0 1.5-10 .0 300-5000
TC Polyester Cotton TC-70
 
We could offer belt width cover grade in accordance to International standard such as DIN 22102, RMA, AS 1332, SABS 1173/ 2000, IS 1891, BS 490, JIS K 6322, etc.
Standards Cover Rubber Adhesion
Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply
DIN 22102 Mpa % mm3 N/ mm
( d1.5mm) N/ mm
( > 1.5mm) N/ mm
DIN 22102-Z 15 350 250 3.5 4.5 5
DIN 22102-W 18 400 90 3.5 4.5 5
DIN 22102-Y 20 400 150 3.5 4.5 5
DIN 22102-X 25 450 120 3.5 4.5 5

Standards Cover Rubber Adhesion
Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply
AS 1332 Mpa % mm3 N/ mm( d1.9mm) N/ mm( > 1.9mm) N/ mm
AS 1332-N17 17 400 200 4 4.8 6
AS 1332-M24 24 450 125 4 4.8 6

Standards Cover Rubber Adhesion
Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply
RMA Mpa % mm3 N/ mm
( d1.6mm) N/ mm
( > 1.6mm) N/ mm
RMA-I 17 400   3 4.4 4
RM A-II 14 400   3 4.4 4

Standards Cover Rubber Adhesion
Tensile Strength Elongation at break Abrasion Cover to Ply Cover to Ply Ply to Ply
SANS 1173 Mpa % mm3 N/ mm N/ mm
A 18 400 70 5 7
C 20 400 150 5 7
M 25 450 120 5 7
N 17 400 150 5 7