1

Unlike other vegetable fats, palm oil is free from cholesterol. As palm oil is solid at room temperature, hydrogenation is not required , a technique which hardens liquid oil but....

1

Class 170 is widely used in sprayed sealing and light asphalt applications to provide durability and fatigue resistance. It is also used to manufacture cutback bitumen, bitumen....

1

Palm olein is used for frying foodstuff as it is stable in high temperatures. The manufacturing process involves deep-frying followed by rapid cooking and blast freezing. Quick....

1

Paving grade bitumen manufactured to a tighter specification than prescribed in AS 2008 and is suitable for standard sealing and lightly trafficked asphalt applications. Bitumen....

1

Lubricants have been around since ancient times. The Petroleum-based Lubricants business started in mid 1800â € ™ s. The initial processing was limited to separation by boiling....

1

Paving grade bitumen manufactured to a tighter specification than prescribed in AS 2008 and is suitable for standard sealing and lightly trafficked asphalt applications. Bitumen....

1

An asphalt emulsion consists of three basic ingredients: asphalt, water, and an emulsifying agent. On some occasions, the emulsion may contain other additives, such as stabilizers....

1

Palm oil, with its moderate linoelic acid content and high level of Natural Antioxidants, is suitable for direct use in most frying applications, and frying is a major use of palm....

1

Modern mineral base oils are the result of a long and complex distillation and refining processes. The feedstock used is crude oil. This substance is not of uniform quality but....

1

Bitumen emulsion consists of three basic ingredients: bitumen, water, and an emulsifying agent. Based on specifications it may contain other additives, such as stabilizers, ....

1

Palm oil is solid at room temperature, has a neutral taste, and can be extracted without the use of solvents has made organic palm oil a very useful ingredient in organic food....

1

Recycling your used motor oil keeps it out of our rivers, lakes, streams and even the ground water. In many cases, that means keeping it out of our drinking water, off our beaches....

1

Description
Alfa coat PF4 Bitumen Paint is low viscosity blend of selected hard grade bitumen in solvent which dries to form a high quality tough bitumen film.

Application
As....

1

Oxidized Bitumen is produced by either Continuous or Staggered Blowing Process. Heated Penetration Grade Bitumen under controlled environment is blown with air which controls the....

1

GROUP II BASE OIL

Hydro processing and Refining

Group II base oils are common in mineral based motor oils currently available on the market. They have fair to good....

1

Performance Grade ( PG) bitumen is bitumen which is graded based on its performance at different temperatures. The LTPP has given certain algorithm to calculate the temperature of....

1

Oxidized Bitumen is produced by either Continuous or Staggered Blowing Process. Heated Penetration Grade Bitumen under controlled environment is blown with air which controls the....

1

Oxidized Bitumen is produced by either Continuous or Staggered Blowing Process. Heated Penetration Grade Bitumen under controlled environment is blown with air which controls the....

1

Alfa Coat 5 Bitumen Emulsion is a single-pack, fibrated and stable water-borne emulsion which cures to form a firm and flexible bitumen waterproofing membrane. Alfa Coat 5 is....

1

To grade the bitumen based on viscosity BIS revised IS-73-1992specifications ( Viscosity at 60Â ° C) and as such there are four grades VG-10, VG-20, VG-30 & VG-40. A few....