1. Can cut holes up to 25mm thick.
2. The cutting length is 41mm.
3. For less horsepower machine.
4. The cutting edges can be re-sharpened.
5. With its very precise and sharp....

1. Can cut holes up to 50mm and 75mm thickness.
2. The cutting length is 70mm and 90mm.
3. Using the combination of stacked plate.
4. With more cutting edges make cutting process....

AD32100F Fein shank to Weldon shank  ¦ 19.05mm
AD32200H Hitachi shank to Weldon shank  ¦ 19.05mm
AD32300N Nitto shank to Weldon shank  ¦ 19.05mm
AD32400A Alfra shank to Weldon....

1. The spring-loaded shank of cutter picks up the hole location quickly, and ejects the slug automatically at
the end of the cut.
2. Available with No. 2 to No. 4 Morse taper....

1. The material is M2.
2. Best result at low cutting speeds.
3. The CBN ground flutes the cutting edges are extremely sharp.
4. Increase hardness at the cutting lips.
5. Excellent....

1. Can smooth and easy cuts.
2. The cutting edge of each step has relief angle.
3. For high precision drilling.
4. Extreme wear resistance.

1. Used for the sheet metal with 3mm.
2. The cutting length is 12mm.
3. High Speed Steel cutting edge
4. Separate arbor required.
5. Used for electric drill, portable and pillar....

1. Can cut materials up to 5mm thick.
2. The cutting length is 28mm.
3. Tungsten Carbide Tipped cutting edges
4. The slug is spring ejected when cutting is finished.
5. Can be....

1. For cutting thick metal up to 30mm and 50mm thickness.
2. The cutting length is 35mm and 60mm.
3. The material is inculding M2, M35 and M42 High Speed Steel.
4. With faster....

1. Can cut holes up to 35mm, 50mm, 75mm and 110mm thickness.
2. The cutting length is 50mm, 70mm, 90mm and 120mm.
3. Special designed cutting edges
4. The special tooth....